• 750ma 18 Watt DIN RAIL load sharing Power Supply 
• 108 mm width 
• Logic override switch to use as Power Supply only, bypassing logic 
• Ethernet with SSL for SCADA connection or network to ilumento /  XYTE cloud connection
• Built in UL924 failure detection to short PDB in the event of power loss
• Built in logic processor for room or small area programming up to 150 Devices
• Built in 12 event time clock

‍

Overview  
The ilumento i-PS18 is a versatile, intelligent Power Supply that can power and manage anything from a single room to a small system. With built-in Ethernet connectivity, the i-PS18 can be part of a larger system and connect to both on-prem or cloud-based monitoring and management solutions.

Power Data Bus Connectivity
By utilizing the Power Data Bus (PDB), installers can simplify their installation process, saving time and money by avoiding complex connections that clutter the cabinet. The PDB communication system transmits 24V DC power and data signals from the intelligent power supply. It provides an emergency Phase Loss trace for alerts and an additional trace for future use.

Ease of Installation  
The i-PS18 easily clips onto the PDB350 and is mounted on the supplied 35x7.5 mm Din Rail for quick and straightforward installation. Power and low-voltage connections are kept separate, maintaining appropriate distances within the cabinet and allowing for easy disconnection with color-coded connectors.

Built-in Phase Loss Monitoring
The i-PS18 has built-in Phase Loss monitoring technology to simplify the installation of emergency systems. The PL monitor holds a relay open as long as there is power, but upon power loss, it will close a contact to the Power Data Bus to drive an emergency single across the PDB350 to any emergency power supplies or control modules.

USB connection
A USB-C connection is provided to allow programming via both wired connections and BLE radio and antenna for wireless communication.

Ethernet Connectivity
This product incorporates two critical security and management features: Ethernet security protocol SSL and Active Directory integration. Together, they provide a robust, user-friendly solution for protecting data and streamlining network access.

External Power connector
An external 24V DC power output provides external power to power devices like the i-DMX-2 Load Controller.

Processor
The i-PS18 incorporates an Arm Cortex-M33, MCU with 2-Mbyte Flash, 640-Kbyte RAM, and 250 MHz CPU to provide logic storage for up to 150 room or system devices. Up to 60 load controllers, 30 keypads, 40 sensors, 15 Device Interfaces, 5 IOs, and support up to 12 presets per unit. It also has a 15-event scheduler built in.

‍

Line Voltage: 100‑277VAC, 50/60 Hz

‍Communications: Ethernet security protocol SSL and Active DirectoryActive PLS monitoring communication with auto shortSpring Loaded Center pin off back of the module for 24VDC, Data and override

‍Connections: Class 1 connection using removable screw terminal type plug2-pin 24VDC power output for AUX equipment using removable screw terminal type plugUSB-CRJ45 InputRJ45 outputMulti pin connection off the back of the case for LV power, Data RX and TX, EM override and future

‍Construction: DIN Rail format, polycarbonate housing106mm wide, 6M DIN Units Wide

‍Weight: 210g (7.41oz)

‍Environmental: 32° to 131°F (0° to 55°C)

‍Control & Feedback: Feedback LED Single Rest, Test, Override button

‍Compliance: Listed for US & Canada, CE, FCC Part 15 Class B, IC, WEEE, IEC 62386Listed for CE, CB global compliance

‍DATA Bus Power output: 750 mA on Power Data Bus - Net 690ma usable

‍Logic: Arm Cortex-M33, MCU with 2-Mbyte Flash, 640-Kbyte RAM, 250 MHz CPU150 Device limit - 60 load Controller zones (i-1Z010RLY, i-1ZUPD, (3) i-DLI)30 Keypads40 Sensors (any combination)15 i-DI5 i-IO12 Presets12 Event Time Clock