• Powered by PDB350
• 36mm width (1.5") DIN RAIL-mounted device
• Removable multi-pin screwless connector
• Two (2) Contact Closure inputs
• Two (2) Control Closure outputs
• One (1) RS232/485 communication port
• Ability to be installed in any cabinet and exposed to system programming

‍

Overview  
The ilumento i-IO is a versatile input/output interface module for 3rd party integration via dry contact or serial communications.

Power Data Bus Connectivity
By utilizing the Power Data Bus (PDB), installers can simplify their installation process, saving time and money by avoiding complex connections that clutter the cabinet. The PDB communication system not only transmits 24V DC power and data signals from the intelligent power supply but also provides an emergency Phase Loss trace for alerts and an additional trace for future use.

Ease of Installation  
The i-IO easily clips onto the PDB350 and is mounted on the supplied 35x7.5 mm DIN Rail for quick and straightforward installation. A removable 12-pin connector allows for easy connections and quick connection back to the module.

Connections
The i-IO is equipped with two (2) dry contact inputs and two (2) dry contact outputs that can be independently configured as momentary or latched controllers. In addition, there is a single RS232 serial communication path for communication to third-party devices like shades, AV, or other equipment.

‍

Control Input: Two (2) Dry Contact Closure inputs

‍Control Output: Two (2) Dry Contact Closure Outputs

‍Operating Voltage: 24DC via Power Data Bus

‍Communications: RS485 Data protocolSpring Loaded Center pin off back of the module for 24VDC, Data and override to i-PS18One (1) RS232, RX/TX/GND communication, 2400,

‍Connections: 12 Pin Push-in connection removable plugClass 2 Override two conductor using removable screw terminal type plugMulti pin connection off the back of the case for LV power, Data RX and TX, EM override and future

‍Construction: DIN Rail format, polycarbonate housing36mm wide, 2M DIN Units Wide

‍Weight: 71g (2.5oz)

‍Environmental: 32° to 131°F (0° to 55°C)

‍Control & Feedback: Feedback LED Single Rest, Test, Override button

‍Compliance: Listed for US & Canada, CE, FCC Part 15 Class B, IC, WEEE, IEC 62386Listed for CE, CB global compliance

‍DATA Bus Power Req: 15mA