• 2 Universe DMX Controller
• 110mm width 
• Built in Ethernet connection
• Uses Control Freak DMX software for SETUP

Overview  
The ilumento i-DMX-2 is a collaborative product developed by Creative Controls and ilumento. It is a robust DMX controller connecting directly with the ilumento system software and network via Ethernet and an open API protocol.

Protocol
It features two outputs that utilize the DMX512 protocol.

Display  
The device includes an OLED display screen for user configuration.

Ethernet Connectivity
There is a single RJ45 Ethernet port that allows for cross-connection to the i-PS18 intelligent power supply.

Programming and Configuration
The ilumento i-DMX-2 uses DIDO Control Freak and Spektra software for show control setup and interfaces with the i-PS18 preset control through an open API.

‍

Dim Load Type: DMX

Dim Control Output: DMX

‍Communications: DMX x 210/100 Base T Ethernet port, DHCP capabilities, and multiple open TCP sockets. UDP is used for broadcast discovery

‍Connections: The DMX512-A line wires are connected in the screw terminals at the top of the enclosure. The inputs allow for short, long, and latching presses. There are 12 inputs available of which 4 can be selected as optically isolated outputs. Each input has an associated action for short and long press, or low and high press if latching. Short press is > 50ms and < 400ms. Long press is > 400ms, with a repeat of 200ms if continually held down.

‍Display: 128 x 96-pixel display that can show the time, status, and other useful information

‍Construction: DIN Rail format, polycarbonate housing

‍Weight:Environmental: 32° to 131°F (0° to 55°C)

‍Compliance: Listed for CE, CB global compliance

‍Power Req: 24vdc (>100mA)