The ilumento i-DLI is a versatile DALI 2 dimming controller. As part of the ilumento system, the DLI controller mixes the DALI fixture protocol with all the benefits of the Project Management Cloud setup software.

Connectivity:

By utilizing the Power Data Bus (PDB), installers can simplify their installation process, saving time and money by avoiding complex connections that clutter the cabinet. The PDB communication system not only transmits 24V DC power and data signals from the intelligent power supply but also provides an emergency Phase Loss trace for alerts and an additional trace for future use.

Ease of Installation:

The i-DLI easily clips onto the PDB350 and is mounted on the supplied 35x7.5 mm Din Rail for quick and straightforward installation. Low-voltage connections DALI and override are kept separate, maintaining appropriate distances within the cabinet and allowing for easy disconnection with color-coded connectors.

Energy Monitoring:

The i-DLI continuously provides real-time energy usage data to the intelligent power supply and network through the Power Data Bus. Energy usage can be monitored in real-time via the ilumento SCADA system and a connected cloud solution by Xyte.

Override Features:

When functioning as an emergency load controller with a dedicated i-PS18 power supply, the i-DLI can receive an emergency override command through the Power Data Bus. A primary i-PS18 managing the room or system logic triggers the emergency override command. Additionally, each i-DLI includes a dedicated manual override for specific zone control.

Device Linking:

Using the ilumento Project Management Cloud startup software and available mobile and web apps, technicians can link up to three i-DLI devices for larger space operations. Linking controllers streamlines setup processes, especially in larger areas that exceed the power capacity of a single controller.

Control Output:

DALI Groups: 16 DALI Drivers: 64 DALI address

Operating Voltage:

24VDC via Power Data Bus

Control Load Types:

DALI

Communication:

RS485 Data protocol Spring Loaded Center pin off back of the module for 24VDC, Data and override to i-PS18 DALI 2 Protocol on DALI Bus

Connections:

Class 2 DALI output using removable screw terminal type plug accepts one 12-24 AWG Class 2 Override two conductor using removable screw terminal type plug Multi pin connection off the back of the case for LV power, Data RX and TX, EM override and future

Construction:

DIN Rail format, polycarbonate housing 36mm wide, 2M DIN Units Wide

Weight:

67g (2.36oz)

Environmental:

32° to 131°F (0° to 55°C)

Control & Feedback:

Feedback LED Single Rest, Test, Override button

Compliance:

Listed for US & Canada, CE, FCC Part 15 Class B, IC, WEEE, IEC 62386 Listed for CE, CB global compliance DALI-2™ Certified and IEC 62386 Compliant DALI® interface for systems that provides control of one DALI loop. Capable of controlling DT6 and DT8 DALI devices.

Power Requirement:

15mA