The ilumento i-1Z010RLY is a versatile multi-mode load controller that can switch between 0-10V dimming, switching, plug-load, and motor control. It features a robust 20A switching circuit, enabling it to handle high in-rush currents and control loads such as plugs and motors, in addition to standard light loads. With ilumento, there is no need for separate controllers for each type of control, as the device can adapt through firmware using the ilumento Project Management Cloud setup software.

Connectivity:

By utilizing the Power Data Bus (PDB), installers can simplify their installation process, saving time and money by avoiding complex connections that clutter the cabinet. The PDB communication system not only transmits 24V DC power and data signals from the intelligent power supply but also provides an emergency Phase Loss trace for alerts and an additional trace for future use.

Ease of Installation:

The i-1Z010RLY easily clips onto the PDB350 and is mounted on the supplied 35x7.5 mm Din Rail for quick and straightforward installation. Power and low-voltage connections are kept separate, maintaining appropriate distances within the cabinet and allowing for easy disconnection with color-coded connectors.

Energy Monitoring:

The i-1Z010RLY continuously provides real-time energy usage data back through the Power Data Bus to the intelligent power supply and network. Energy usage can be monitored in real-time via the ilumento SCADA system and a connected cloud solution by Xyte.

Override Features:

When functioning as an emergency load controller with a dedicated i-PS18 power supply, the i-1Z010RLY can receive an emergency override command through the Power Data Bus. A primary i-PS18 managing the room or system logic triggers the emergency override command. Additionally, each i-1Z010RLY includes a dedicated manual override for specific zone control.

Device Linking:

Using the ilumento Project Management Cloud startup software and available mobile and web apps, technicians can link up to six i-1Z010RLY devices for larger space operations. Linking controllers streamlines setup processes, especially in larger areas that exceed the power capacity of a single controller.

Control Output:

0-10V, 60mA source or sink

Operating Voltage:

100‑277VAC, 50/60 Hz

Control Load Types:

LED, Magnetic Low Voltage, Incandescent, Electronic Low Voltage, Plug Load, HID, Motor Control

Switch Rating:

100,000 on/off operations, 16A @ 277VAC

Motor Rating:

Motor Rating: 100,000 on/off operations, 1HP @ 120/230/277VAC

Cycle Lifetime:

100,000 on/off operations, 16A @ 277VAC Motor Rating: 100,000 on/off operations, 1HP @ 120/230/277VAC

Communication:

RS485 Data protocol Spring Loaded Center pin off back of the module for 24VDC, Data and override to i-PS18

Connections:

Class 1 connection using removable screw terminal type plug Class 1 Switch out using removable screw terminal type plug Class 2 0-10V output using removable screw terminal type plug accepts one 12-24 AWG Class 2 Override two conductor using removable screw terminal type plug Multi pin connection off the back of the case for LV power, Data RX and TX, EM override and future

Construction:

DIN Rail format, polycarbonate housing 36mm wide, 2M DIN Units Wide

Weight:

75g (2.65oz)

Environmental:

32° to 131°F (0° to 55°C)

Control & Feedback:

Feedback LED Single Rest, Test, Override button

Compliance:

Listed for US & Canada, CE, FCC Part 15 Class B, IC, WEEE, IEC 62386 Listed for CE, CB global compliance

Power Requirement:

15mA